Series 25
Small and incredible
100% reversible
Entirely made of special steel alloy increases the resistance of the electric strike to 800 n.
A symmetric construction with radial adjustable keeper and electronic protection that provide versatility to your installation.

Series 25
Small and incredible
100% reversible
Entirely made of special steel alloy increases the resistance of the electric strike to 800 n.
A symmetric construction with radial adjustable keeper and electronic protection that provide versatility to your installation.
A larger span of the electric strike ensures instant blocking of heavier doors. The huge selection of voltages allows a quickly aperture with only one function of the energy consume. The series 25 has the highest side-load of all models.
8.000 N
Break-in resistance
4.450 N
Dynamic strength
200 N
Endurance rating
Complies with EN 14846
3x300l001


Deep and adjustable
For a better adjustment, the depth has been increased up to 6 mm for the adjustable keeper, with a displacement of 3 mm for an accurate adjustment for the door.

CURVES ARE BEAUTIFUL
The radial keeper turns inside the mechanisms box, which means you won’t need to cut the doorframe.

STEPPING OUT
OF THE BOX:
The joint of the keeper and the automatic switch removes the critical spaces and offers a better contact with the latch of the door.
Dimensions

An electronic microchip is responsible for automatically managing any voltage from 6 - 28 v ac/dc 100%. It also incorporates a temperature detection system to prevent the mechanism from overheating reaching maximum temperatures of 40ºc. The internal programming achieves a greater capacity of lateral preload increasing it up to 800N.
8.000 N
Break-in resistance
4.450 N
Dynamic strength
800 N
Endurance rating
Electronic
Complies with EN 14846
3y300l001


Deep and adjustable
For a better adjustment, the depth has been increased up to 6 mm for the adjustable keeper, with a displacement of 3 mm for an accurate adjustment for the door.

CURVES ARE BEAUTIFUL
The radial keeper turns inside the mechanisms box, which means you won’t need to cut the doorframe.

STEPPING OUT
OF THE BOX:
The joint of the keeper and the automatic switch removes the critical spaces and offers a better contact with the latch of the door.
Dimensions
