Series PB
Detection system and fire alarms
One touch in security
The evacuation, detection and extinction systems are the fastest and safest way to notify in case of emergency.

Series PB
Detection system and fire alarms
One touch in security
The evacuation, detection and extinction systems are the fastest and safest way to notify in case of emergency.
Evacuation systems
Evacuation button PB1 y PB2
The manual evacuation push buttons are activated to allow the aperture of the access control systems in case of generalized failure.
They are resettable with a key and have an extractable terminal strip to an easier installation.
Technical Characteristics
- Semi-recessed
- Hight brightness LED
- Extractable terminal strip
- Key to reset and open the box
- Norm EN 54-11

Fire detection systems
Alarm button PB3 y PB3M
In case of fire, the manual alarm push button can be activated to inform the emergency fire panel.
The precise identification of the fire location will depend to which fire alarm detection system is connected. It could be conventional, addressable or analog addressable.
Technical Characteristics
- Semi-recessed
- Hight brightness LED
- Extractable terminal strip
- Key to reset and open the box
- Norm EN 54-11

Automatic gaseous fire suppression system
Stop button PB4
This locking button prevails over the extinguishing trigger button. The function is to block or abort the automatic gaseous fire suppression system.
Technical Characteristics
- Semi-recessed
- Hight brightness LED
- Extractable terminal strip
- Key to reset and open the box
- Norm EN 54-11

Automatic gaseous fire suppression system
Trigger button PB5
When is activated the trigger button, the control panel is informed to activate the extinction process. Following the european normative this process will take maximum 60 seconds.
Technical Characteristics
- Semi-recessed
- Hight brightness LED
- Extractable terminal strip
- Key to reset and open the box
- Norm EN 54-11
