En Openers & Closers apostamos por la innovación, aplicando los avances tecnológicos a nuestros productos con un único objetivo en mente: hacerle la vida más fácil y segura a nuestros clientes con nuestros cerraderos electrónicos.
The future has finally arrived. After years of research and creative effort, we present the first electronic strike on the market. Specially designed to adapt to any access control system: simple and unique.
Complies with EN14846
The new radial system allows the keeper to rotate on its own axis. When the rotation is performed inside the mechanisms housing the installation of an electric strike becomes easier, less time consuming and more aesthetically pleasing.
Designers and engineers at O&C had the challenge to create a hold-open system that was both durable and able to adapt to all kinds of door latches. The new automatic system is more reliable, simple and effective.
Our passion for every little detail made us enhance the traditional mechanical unlocking system of electric strikes. Now it’s much more precise and durable.
Our engineers at o&c found a sophisticated and advanced solution for any fire door that requires an extra layer of protection: to include a microprocessor that unlocks the door from 6 to 28v ac / dc. While increasing the side-load up to 400 n. This powerful chip is also responsible for controlling the temperature of the electronic strike, so it doesn’t exceed 40 °c.
90min of fire resistance
Complies with EN14846
The monitoring that detects the status of the door has now an interchangeable position to provide a more comfortable and secure installation.
Fully manufactured in a steel alloy that can withstand high temperatures and helps maintain fire doors sealed.
An ingenious redesign of the mechanism housing has increased the depth of the keeper to 6mm and 3mm adjustability while maintaining its perfect radial rotation.
An electronic microchip is responsible for automatically managing any voltage from 6 - 28 v ac/dc 100%. It also incorporates a temperature detection system to prevent the mechanism from overheating reaching maximum temperatures of 40ºc. The internal programming achieves a greater capacity of lateral preload increasing it up to 800 n.
Complies with EN 14846
Deep and adjustable
For a better adjustment, the depth has been increased up to 6 mm for the adjustable keeper, with a displacement of 3 mm for an accurate adjustment for the door.
CURVES ARE BEAUTIFUL
The radial keeper turns inside the mechanisms box, which means you won’t need to cut the doorframe.
OF THE BOX:
The joint of the keeper and the automatic switch removes the critical spaces and offers a better contact with the latch of the door.